Diagnostics

Finding a hidden leak before it finds your ceiling

A five-minute meter test you can run yourself, and what the result narrows down.

Finding a hidden leak before it finds your ceiling

Most hidden leaks are found by a homeowner with five free minutes and a water meter, not by a specialist with a thermal camera. Start there.

If the meter moves with everything shut off, you have proof of a leak before any damage is visible.

The meter test

Turn every tap, appliance and outdoor spur off. Note the meter reading, wait fifteen minutes, read again. Any movement is a live leak.

Narrow it down

Close the internal stopcock. If the meter still moves, the leak is on the supply side; if it stops, it is inside the property.

Look for the quiet clues

A hiss at night, a warm patch of floor, a musty smell in a cupboard, or a boiler losing pressure with no visible water.

Then call for tracing

A pressure test and acoustic survey turns a suspicion into a marked spot, which turns a rebuild into a patch.

The short version

  • Fifteen minutes at the meter is the cheapest leak test there is
  • The stopcock splits supply-side from internal leaks
  • Tracing before opening saves the most money
If a job needs more than this guide covers, book a survey — diagnosis is free with any repair booked in the same visit.
Plumber working at a bench in low light
Ready when you are

Need a plumber? We’re already on the way