Water quality

Is your tap water safe? A simple guide to home filtration

What sediment, carbon and reverse osmosis filters actually remove — and which one your kitchen really needs.

Is your tap water safe? A simple guide to home filtration

Filtration is sold by fear, but it is really an engineering choice. Different filters remove different things, and past a certain point you are paying for purity your pipes will undo anyway.

Here is the short version of how each stage works, and the order we would fit them in an ordinary home.

Start with sediment, not with chemistry

A 5-micron sediment stage protects everything downstream — the carbon block, the appliance valves, the aerator screens. If your water arrives cloudy after rainfall, this alone visibly improves it.

Carbon does the taste work

Activated carbon adsorbs chlorine and its by-products, plus many taste and odour compounds. It is the stage you notice in a blind taste test, and it is cheap to replace.

Reverse osmosis is for specific problems

RO removes dissolved salts, nitrates and most metals, at the cost of waste water and a slow flow. It makes sense where a test shows a real contaminant — not as a default upgrade.

Change the cartridges on a calendar

A spent carbon block stops adsorbing and starts hosting. Put the change date on the housing in marker; it is the single most common reason a good filter performs badly.

The short version

  • Sediment first, carbon second, RO only when a test justifies it
  • Protect the filter with an isolation valve so changes are dry
  • Replace cartridges on a written schedule, not a memory
If a job needs more than this guide covers, book a survey — diagnosis is free with any repair booked in the same visit.
Plumber working at a bench in low light
Ready when you are

Need a plumber? We’re already on the way