Maintenance

How to keep pipes flowing through a cold snap

A two-hour checklist for the loft, the outdoor tap and the empty room above the garage.

How to keep pipes flowing through a cold snap

Frozen pipes are an insulation problem with a plumbing consequence. The pipe that bursts is usually not the pipe that froze — pressure builds between the ice and a closed valve.

Work through this list before the first hard frost and you remove most of the risk.

Lag the cold runs, not just the hot

Cold pipes in the loft, the garage and against an external wall are the usual suspects. Foam lagging and a taped joint cost very little.

Isolate and drain outdoor taps

Close the internal isolator, open the tap outside, and leave it open. A drained spur cannot split.

Keep a trickle moving overnight

On the coldest night, a pencil-thin flow on the furthest tap keeps water moving through the vulnerable run.

Know where the stopcock is

Test it now. A stopcock that has not moved in five years will not move when you need it.

The short version

  • Lag cold runs, isolate outdoor taps, test the stopcock
  • Leave heating on low rather than off in an empty house
  • If a pipe freezes, thaw from the tap end, never with a flame
If a job needs more than this guide covers, book a survey — diagnosis is free with any repair booked in the same visit.
Plumber working at a bench in low light
Ready when you are

Need a plumber? We’re already on the way